2
基本上，對於我的操作系統類，我正在編寫一個模擬5個終端機場穿梭機的內核模塊。到目前爲止，我已經能夠實現系統調用並驗證它們是否正常工作。但是，我試圖將這些系統調用鏈接到一個模塊中。對於每個內核存根和函數，當我嘗試插入模塊時，它表示它是未定義的。另外，作爲副產品，當我運行此命令時，模塊不會插入：make; sudo insmod terminal.ko由於模塊中存在未知符號，這是我發現很少或沒有任何文檔的錯誤。內核模塊函數未定義
這裏的輸出，當我試圖讓並將其插入：
make -C /lib/modules/`uname -r`/build/ M=`pwd` modules
make[1]: Entering directory `/home/taylor/OPSYS_P2/linux-3.16.4'
Building modules, stage 2.
MODPOST 1 modules
WARNING: "STUB_issue_request" [/home/taylor/OPSYS_P2/linux-3.16.4/opsyscall/module/terminal.ko] undefined!
WARNING: "issue_request" [/home/taylor/OPSYS_P2/linux-3.16.4/opsyscall/module/terminal.ko] undefined!
WARNING: "STUB_stop_shuttle" [/home/taylor/OPSYS_P2/linux-3.16.4/opsyscall/module/terminal.ko] undefined!
WARNING: "stop_shuttle" [/home/taylor/OPSYS_P2/linux-3.16.4/opsyscall/module/terminal.ko] undefined!
WARNING: "STUB_start_shuttle" [/home/taylor/OPSYS_P2/linux-3.16.4/opsyscall/module/terminal.ko] undefined!
WARNING: "start_shuttle" [/home/taylor/OPSYS_P2/linux-3.16.4/opsyscall/module/terminal.ko] undefined!
make[1]: Leaving directory `/home/taylor/OPSYS_P2/linux-3.16.4'
insmod: ERROR: could not insert module terminal.ko: Unknown symbol in module
主模塊代碼：
#include <linux/module.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
#include <linux/time.h> // Time Lib
#include "./syscall.h"
MODULE_LICENSE("GPL");
// Stubs for kernel module implementation of shuttle services
extern int (* STUB_start_shuttle)(void);
extern int (* STUB_stop_shuttle)(void);
extern int (* STUB_issue_request)(char passenger_type, int initial_terminal, int destination_terminal);
static int terminal_show(struct seq_file *m, void *v) {
seq_printf(m,"%s\n", "The Shuttle is out of service");
return 0;
}
static int terminal_open(struct inode *inode, struct file *file) {
return single_open(file, terminal_show, NULL);
}
static const struct file_operations terminal_fops = {
.owner = THIS_MODULE,
.open = terminal_open,
.read = seq_read,
.release = single_release,
};
/**
* Terminal Init
* Sets up a proc file, sets syscall stubs correctly
*/
static int __init terminal_init(void) {
proc_create("terminal", 0, NULL, &terminal_fops);
// Redirect stub syscalls to our implementation
STUB_start_shuttle = &start_shuttle;
STUB_stop_shuttle = &stop_shuttle;
STUB_issue_request = &issue_request;
return 0;
}
/**
* Terminal Exit
* Removes the proc file, tears down stubs
*/
static void __exit terminal_exit(void) {
STUB_start_shuttle = NULL;
STUB_stop_shuttle = NULL;
STUB_issue_request = NULL;
remove_proc_entry("terminal", NULL);
}
module_init(terminal_init);
module_exit(terminal_exit);
這裏的syscall.h文件：
#pragma once
#include <linux/err.h>
#include <linux/kthread.h>
#include <linux/list.h>
#include <linux/sched.h>
#include <linux/time.h>
// Prototype Declarations
int start_shuttle(void);
int stop_shuttle(void);
int issue_request(char passenger_type, int initial_terminal, int destination_terminal);
這裏的相應的c文件，syscall.c：
#include "syscalls.h"
/**
* Start Shuttle - Syscall
* Description: Starts the shuttle up in its own thread unless it is already running
*/
int start_shuttle(void) {
int result = 0;
return result;
}
/**
* Stop Shuttle - Syscall
* Description: Tells the shuttle to stop unless it is already stopping
*/
int stop_shuttle(void) {
int result = 0;
return result;
}
/**
* Issue Request - Syscall
* Description: Adds a passenger, if valid, into a chosen terminal with a desired
* destination
*/
int issue_request(char passenger_type, int initial_terminal, int destination_terminal) {
printk(KERN_DEBUG "Shuttle Service: Invalid issue_request - passenger_type %c initial_terminal %d destination_terminal %d\n",
passenger_type, initial_terminal, destination_terminal);
return 1;
}
任何和所有的幫助/建議將會很棒！
運行Ubuntu 14.04，內核版本3.16.4