我不想讓數組做分詞

下面是我的代碼。但bash正在分詞，因此我失敗了。如何使我的腳本，以便沒有分詞。我不想讓數組做分詞

namaSensor=$(sensors | egrep "°C" | awk '{print $0}' | awk -F ':' '{print $1}') 
for sensor in $namaSensor 
do 
    if [ $(sensors | grep -c "$sensor") -ne 0 ] 
    then 
     currentTemperature=$(sensors | egrep "$sensor" | awk '{print $0}' | awk -F '+' '{print $2}' | cut -c 1-4 | awk -F '.' '{print $1}') 
     maxTemperature=$(sensors | egrep "$sensor" | awk '{print $0}' | awk -F '+' '{print $3}' | cut -c 1-4 | awk -F '.' '{print $1}') 
     if [ $currentTemperature -lt $maxTemperature ] 
     then 
      printf "current temperature is %d°C and the maximum allowed temperature is %d°C\n" "$currentTemperature" "$maxTemperature" 
      printf "temperature is within the maximum allowed temperature\n" 
      echo "$sensor" 
     else 
      printf "current temperature is %d°C and the maximum allowed temperature is %d°C\n" "$currentTemperature" "$maxTemperature" 
      printf "temperature is more than the maximum allowed temperature\n" 
      #exit 255 
     fi 
    fi 
done.

這是我單位的傳感器輸出。

acpitz-virtual-0 
Adapter: Virtual device 
temp1:  +40.0Â°C (crit = +111.0Â°C) 
temp2:  +40.0Â°C (crit = +111.0Â°C) 

coretemp-isa-0000 
Adapter: ISA adapter 
Physical id 0: +34.0Â°C (high = +87.0Â°C, crit = +105.0Â°C) 
Core 0:   +31.0Â°C (high = +87.0Â°C, crit = +105.0Â°C) 
Core 1:   +22.0Â°C (high = +87.0Â°C, crit = +105.0Â°C)

請幫

來源

2013-03-15 gerald anand

我認爲你還需要提供你期望看到的。此外，正在執行的傳感器的輸出將有助於 – Vahid 2013-03-15 07:10:14

因此，如果同時存在最大溫度和臨界溫度，則使用最大值。如果只有臨界溫度，那麼應該使用？ – Scrutinizer 2013-03-15 09:28:22

據我瞭解你有你的陣列分裂如下：

物理

等。要更改此行爲，您需要將您的內部字段分隔符（IFS）更改爲換行符。所以你的代碼應該是這樣的：

IFS=$'\n' 
nameSensor=$(sensors | egrep "°C" | awk '{print $0}' | awk -F ':' '{print $1}') 
for sensor in $nameSensor 
do 
    if [ $(sensors | grep -c "$sensor") -ne 0 ]; then 
     currentTemperature=$(sensors | egrep "$sensor" | awk '{print $0}' | awk -F '+' '{print $2}' | cut -c 1-4 | awk -F '.' '{print $1}') 
     maxTemperature=$(sensors | egrep "$sensor" | awk '{print $0}' | awk -F '+' '{print $3}' | cut -c 1-4 | awk -F '.' '{print $1}') 
     if [ $currentTemperature -lt $maxTemperature ]; then 
      printf "current temperature is %d°C and the maximum allowed temperature is %d°C\n" "$currentTemperature" "$maxTemperature" 
      printf "temperature is within the maximum allowed temperature\n" 
      echo "$sensor" 
     else 
      printf "current temperature is %d°C and the maximum allowed temperature is %d°C\n" "$currentTemperature" "$maxTemperature" 
      printf "temperature is more than the maximum allowed temperature\n" 
      #exit 255 
     fi 
    fi 
done

來源

2013-03-15 08:16:30

謝謝。它以我想要的方式工作。 – 2013-03-15 09:45:22

我不想讓數組做分詞

回答

相關問題