2011-11-24 67 views
13

當我試圖將我的項目推送到Heroku時,我收到了錯誤(下面)。谷歌搜索發現有幾個人出現了類似的問題,但在錯誤發生之前與最後一顆寶石有着不同的寶石,所以我認爲這不適用於監獄長。我發現的幾個類似的錯誤/ github問題有解決方案指向一個rubygems錯誤,這顯然是to be fixed in 1.8.10(我已經得到了,所以我懷疑它是這個問題要麼正在拋出normalize_yaml_input中的無效字節序列錯誤?

任何建議會可以理解的,我敢肯定這件事情簡單的我已經錯過了

cobychapple at shiva in ~/code/zzz on master! 
± git push heroku master 
Counting objects: 201, done. 
Delta compression using up to 2 threads. 
Compressing objects: 100% (181/181), done. 
Writing objects: 100% (201/201), 92.14 KiB, done. 
Total 201 (delta 38), reused 0 (delta 0) 

-----> Heroku receiving push 
-----> Ruby/Rails app detected 
-----> Detected Rails is not set to serve static_assets 
     Installing rails3_serve_static_assets... done 
-----> Configure Rails 3 to disable x-sendfile 
     Installing rails3_disable_x_sendfile... done 
-----> Configure Rails to log to stdout 
     Installing rails_log_stdout... done 
-----> Gemfile detected, running Bundler version 1.0.7 
     Unresolved dependencies detected; Installing... 
     Using --without development:test 
     Fetching source index for http://rubygems.org/ 
     Installing rake (0.9.2.2) 
     Installing multi_json (1.0.3) 
     Installing activesupport (3.1.2) 
     Installing builder (3.0.0) 
     Installing i18n (0.6.0) 
     Installing activemodel (3.1.2) 
     Installing erubis (2.7.0) 
     Installing rack (1.3.5) 
     Installing rack-cache (1.1) 
     Installing rack-mount (0.8.3) 
     Installing rack-test (0.6.1) 
     Installing hike (1.2.1) 
     Installing tilt (1.3.3) 
     Installing sprockets (2.1.2) 
     Installing actionpack (3.1.2) 
     Installing mime-types (1.17.2) 
     Installing polyglot (0.3.3) 
     Installing treetop (1.4.10) 
     Installing mail (2.3.0) 
     Installing actionmailer (3.1.2) 
     Installing arel (2.2.1) 
     Installing tzinfo (0.3.31) 
     Installing activerecord (3.1.2) 
     Installing activeresource (3.1.2) 
     Installing addressable (2.2.6) 
     Installing bcrypt-ruby (3.0.1) with native extensions 
     Installing coffee-script-source (1.1.3) 
     Installing execjs (1.2.9) 
     Installing coffee-script (2.2.0) 
     Installing rack-ssl (1.3.2) 
     Installing json (1.6.1) with native extensions 
     Installing rdoc (3.11) 
     Installing thor (0.14.6) 
     Installing railties (3.1.2) 
     Installing coffee-rails (3.1.1) 
     Installing orm_adapter (0.0.5) 
     Installing warden (1.1.0) 
     /usr/ruby1.9.2/lib/ruby/1.9.1/rubygems/specification.rb:519:in `normalize_yaml_input': invalid byte sequence in US-ASCII (ArgumentError) 
     from /usr/ruby1.9.2/lib/ruby/1.9.1/rubygems/specification.rb:479:in `from_yaml' 
     from /usr/ruby1.9.2/lib/ruby/1.9.1/rubygems/package/tar_input.rb:183:in `load_gemspec' 
     from /usr/ruby1.9.2/lib/ruby/1.9.1/rubygems/package/tar_input.rb:51:in `block in initialize' 
     from /usr/ruby1.9.2/lib/ruby/1.9.1/rubygems/package/tar_reader.rb:64:in `block in each' 
     from /usr/ruby1.9.2/lib/ruby/1.9.1/rubygems/package/tar_reader.rb:55:in `loop' 
     from /usr/ruby1.9.2/lib/ruby/1.9.1/rubygems/package/tar_reader.rb:55:in `each' 
     from /usr/ruby1.9.2/lib/ruby/1.9.1/rubygems/package/tar_input.rb:32:in `initialize' 
     from /usr/ruby1.9.2/lib/ruby/1.9.1/rubygems/package/tar_input.rb:17:in `new' 
     from /usr/ruby1.9.2/lib/ruby/1.9.1/rubygems/package/tar_input.rb:17:in `open' 
     from /usr/ruby1.9.2/lib/ruby/1.9.1/rubygems/package.rb:58:in `open' 
     from /usr/ruby1.9.2/lib/ruby/1.9.1/rubygems/format.rb:63:in `from_io' 
     from /usr/ruby1.9.2/lib/ruby/1.9.1/rubygems/format.rb:51:in `block in from_file_by_path' 
     from /usr/ruby1.9.2/lib/ruby/1.9.1/open-uri.rb:35:in `open' 
     from /usr/ruby1.9.2/lib/ruby/1.9.1/open-uri.rb:35:in `open' 
     from /usr/ruby1.9.2/lib/ruby/1.9.1/rubygems/format.rb:50:in `from_file_by_path' 
     from /usr/ruby1.9.2/lib/ruby/gems/1.9.1/gems/bundler-1.0.7/lib/bundler/source.rb:72:in `fetch' 
     from /usr/ruby1.9.2/lib/ruby/gems/1.9.1/gems/bundler-1.0.7/lib/bundler/installer.rb:45:in `block in run' 
     from /usr/ruby1.9.2/lib/ruby/gems/1.9.1/gems/bundler-1.0.7/lib/bundler/spec_set.rb:12:in `block in each' 
     from /usr/ruby1.9.2/lib/ruby/gems/1.9.1/gems/bundler-1.0.7/lib/bundler/spec_set.rb:12:in `each' 
     from /usr/ruby1.9.2/lib/ruby/gems/1.9.1/gems/bundler-1.0.7/lib/bundler/spec_set.rb:12:in `each' 
     from /usr/ruby1.9.2/lib/ruby/gems/1.9.1/gems/bundler-1.0.7/lib/bundler/installer.rb:44:in `run' 
     from /usr/ruby1.9.2/lib/ruby/gems/1.9.1/gems/bundler-1.0.7/lib/bundler/installer.rb:8:in `install' 
     from /usr/ruby1.9.2/lib/ruby/gems/1.9.1/gems/bundler-1.0.7/lib/bundler/cli.rb:225:in `install' 
     from /usr/ruby1.9.2/lib/ruby/gems/1.9.1/gems/bundler-1.0.7/lib/bundler/vendor/thor/task.rb:22:in `run' 
     from /usr/ruby1.9.2/lib/ruby/gems/1.9.1/gems/bundler-1.0.7/lib/bundler/vendor/thor/invocation.rb:118:in `invoke_task' 
     from /usr/ruby1.9.2/lib/ruby/gems/1.9.1/gems/bundler-1.0.7/lib/bundler/vendor/thor.rb:246:in `dispatch' 
     from /usr/ruby1.9.2/lib/ruby/gems/1.9.1/gems/bundler-1.0.7/lib/bundler/vendor/thor/base.rb:389:in `start' 
     from /usr/ruby1.9.2/lib/ruby/gems/1.9.1/gems/bundler-1.0.7/bin/bundle:13:in `<top (required)>' 
     from /usr/ruby1.9.2/bin/bundle:19:in `load' 
     from /usr/ruby1.9.2/bin/bundle:19:in `<main>' 
     FAILED: http://devcenter.heroku.com/articles/bundler 
!  Heroku push rejected, failed to install gems via Bundler 

To [email protected]:zzz.git 
! [remote rejected] master -> master (pre-receive hook declined) 
error: failed to push some refs to '[email protected]:zzz.git' 

這裏是bundle install輸出也一樣,如果它可以幫助:

cobychapple at shiva in ~/code/zzz on master 
± bundle install 
Using rake (0.9.2.2) 
Using multi_json (1.0.3) 
Using activesupport (3.1.2) 
Using builder (3.0.0) 
Using i18n (0.6.0) 
Using activemodel (3.1.2) 
Using erubis (2.7.0) 
Using rack (1.3.5) 
Using rack-cache (1.1) 
Using rack-mount (0.8.3) 
Using rack-test (0.6.1) 
Using hike (1.2.1) 
Using tilt (1.3.3) 
Using sprockets (2.1.2) 
Using actionpack (3.1.2) 
Using mime-types (1.17.2) 
Using polyglot (0.3.3) 
Using treetop (1.4.10) 
Using mail (2.3.0) 
Using actionmailer (3.1.2) 
Using arel (2.2.1) 
Using tzinfo (0.3.31) 
Using activerecord (3.1.2) 
Using activeresource (3.1.2) 
Using addressable (2.2.6) 
Using ansi (1.4.1) 
Using bcrypt-ruby (3.0.1) 
Using bundler (1.0.18) 
Using coffee-script-source (1.1.3) 
Using execjs (1.2.9) 
Using coffee-script (2.2.0) 
Using rack-ssl (1.3.2) 
Using json (1.6.1) 
Using rdoc (3.11) 
Using thor (0.14.6) 
Using railties (3.1.2) 
Using coffee-rails (3.1.1) 
Using orm_adapter (0.0.5) 
Using warden (1.1.0) 
Using devise (1.5.1) 
Using faker (1.0.1) 
Using rails (3.1.2) 
Using formtastic (2.0.2) 
Using formtastic-bootstrap (1.0.1) 
Using haml (3.1.3) 
Using launchy (2.0.5) 
Using rest-client (1.6.7) 
Using rubyzip (0.9.4) 
Using term-ansicolor (1.0.7) 
Using heroku (2.14.0) 
Using jquery-rails (1.0.18) 
Using kaminari (0.12.4) 
Using populator (1.0.0) 
Using sass (3.1.10) 
Using sass-rails (3.1.5) 
Using sequel (3.20.0) 
Using sinatra (1.0) 
Using sqlite3 (1.3.4) 
Using sqlite3-ruby (1.3.3) 
Using taps (0.3.23) 
Using turn (0.8.2) 
Using uglifier (1.1.0) 
Your bundle is complete! Use `bundle show [gemname]` to see where a bundled gem is installed. 

的RubyGems版本:

cobychapple at shiva in ~/code/zzz on master 
± gem -v 
1.8.10 

回答

39

我有同樣的問題,通過把這個對我Gemfile頂部解決它:

if RUBY_VERSION =~ /1.9/ 
    Encoding.default_external = Encoding::UTF_8 
    Encoding.default_internal = Encoding::UTF_8 
end 

在本post建議。

+0

也適用於capistrano部署情況(不只是heroku) –

-2

我遇到一個問題,當我使用哲基爾寫在GitHub(Ruby193)靜態博客網頁:

Liquid error: incompatible character encodings: UTF-8 and ASCII-8BIT

我解決了這個問題通過改變從紅寶石紅寶石193 Ruby187。

相關問題