0
我想在MIPS中使用冒泡排序對整數數組進行排序，但是每當我運行冒泡排序時，我都會得到一個超出範圍錯誤的地址。我一直盯着代碼幾個小時，不知道爲什麼會發生這種情況。希望「有一點非常明顯，有更多經驗的人可以看到並幫助我解決問題。 程序的要點是簡單地讀取整數和符號（股票價格和股票代碼），然後根據價格進行排序。下面是代碼：泡沫排序MIPS
.data
welcome: .asciiz "Welcome!\n"
prompt1: .asciiz "Enter how many stocks you have.\n >"
prompt2: .asciiz "Enter the four character NASDAQ abbrevation and price for each stock.\n"
prompt3p1: .asciiz "You have entered "
prompt3p2: .asciiz " stock abbreviations and prices. How many stocks do you want to buy:\n"
prompt4: .asciiz "How many stocks do you want to sell:\n"
InfoPrompt: .asciiz "Here are the symbols and the corresponding numbers that were entered: \n"
numStocks: .word 0
stockPrice: .space 40 # this will be the list of the stock prices
stockSymbol: .word 0:20 # this will be for the lit of stock abbrevs
symbols: .space 12 #this should be used for a 40 character array
inputFormat: .asciiz "\n> "
length: .word 0
buffer: .space 4
.globl main
.text
main: # display all of the propts
li $v0, 4 # get ready to print welcome
la $a0, welcome
syscall # print welcome
li $v0, 4 # not sure this is necessary since it was already loaded into v0 before
la $a0, prompt1
syscall # print("enter how many stocks you have.")
li $v0, 5 # this will get ready to accept the number of stocks
syscall # this should store the number into the $v0 register
sw $v0, numStocks # store in memory so we dont lose it
move $t0, $v0 # this will hold the num of stocks
#before we go into the procedure we need to declare and move the stack for the $t registers.
la $t1, symbols
la $t2, stockPrice
sub $sp, $sp, 8
sw $t1, 0($sp)
sw $t2, 4($sp)
jal getInfo
# now that we have all the information lets run a test to see how successful we were
# jal printInfo
li $v0, 4 #get ready to ask how many items you want to buy
la $a0, prompt3p1
syscall
li $v0, 1
lw $a0, numStocks # prints the number of stocks in the portfolio
syscall
li $v0, 4
la $a0, prompt3p2
syscall
# we need to now get the number of stocks the person wants to buy
li $v0, 4
la $a0, inputFormat
syscall #format the next input
li $v0, 5
syscall
move $t3, $v0 # the number of stocks we want to buy is now stored as $t3
#we need to get how many they want to buy
li $v0, 4
la $a0, prompt4
syscall
li $v0, 4
la $a0, inputFormat
syscall #format the next input
li $v0, 5
syscall
move $t4, $v0 # the number of stocks that you want to sell
# now we have to sort the list to figure out what elements we are going to sell and buy
la $a2, stockPrice
la $a0, stockPrice
la $a1, numStocks
jal buble_sort
jal printInfo
# end program
li $v0,10 #load the syscall number for terminating
syscall #terminate
####################################################################
# This will iterate for the number of stocks
# Only accepts the number of stocks
####################################################################
getInfo:
sub $sp, $sp, 8
sw $ra, 0($sp) # store the return value
sw $t0, 4($sp) # Save the t registers that we will be using
li $v0, 4 # set up the first call to initialize the calls for the abbreviations and numbers
la $a0, prompt2
syscall
# we want to have a place to store the symbols
la $t1, symbols
la $t2, stockPrice
GI_loop:
beq $t0, $zero, GI_loop_done # if the counter == 0 then we are done
li $v0, 4
la $a0, inputFormat
syscall #format the next input
# ask for the string input
li $v0, 8
la $a0, 0($t1)
li $a1, 6
syscall
#store the value in the array
addi $t1, $t1, 6 #increment our "array"
# ask for the integer input
li $v0, 4
la $a0, inputFormat
syscall #format the next input
li $v0, 5
syscall # get the integer value that we require
sw $v0, 0($t2) #store the value
addi $t2, $t2,4 #increment our counter
addi $t0, $t0, -1 # decrement our counter
j GI_loop
GI_loop_done:
lw $ra, 0($sp)
lw $t0, 4($sp)
lw $t1, 8($sp)
lw $t2, 12($sp)
add $sp, $sp, 8
jr $ra
####################################################################
# This will go through the lists and print out what was stored
# will go through the symbols then the numbers
####################################################################
printInfo:
sub $sp, $sp, 12
sw $ra, 0($sp)
sw $t0, 4($sp) # this will store the number of stocks that were entered
sw $t1, 8($sp)
li $v0, 4
la $a0, InfoPrompt
syscall
# we know that $t0 stores the correct number that was originally enetered so we need to loop through and print all the integers
InfoLoop:
beq $t0, $zero, InfoLoopDone # a basic counter check
#li $v0, 4
#la $a0, 0($t1)
#syscall
#addi $t1, $t1, 6
#addi $t0, $t0, -1
#j InfoLoop
################################### INTEGER PRINT WORKING
li $v0, 1 # this will print out the integers
lw $a0, 0($t2) # we have to load the world that is found in the address of $t2
syscall
addi $t2,$t2, 4 # this will increment the array
addi $t0, $t0, -1 ## this will fix our counter
j InfoLoop
InfoLoopDone:
lw $ra, 0($sp)
lw $t0, 4($sp)
add $sp, $sp, 8
jr $ra
################################
# BUBBLE SORT
################################
buble_sort:
#a0=address of table
#a1=sizeof table
add $t0,$zero,$zero #counter1(i)=0
loop1:
addi $t0,$t0,1 #i++
bgt $t0,$a1,endloop1 #if t0 > a1 break;
add $t1,$a1,$zero #counter2=size=6
loop2:
bge $t0,$t1,loop1 #j < = i
#slt $t3,$t1,$t0
#bne $t3,$zero,loop1
addi $t1,$t1,-1 #j--
mul $t4,$t1,4 #t4+a0=table[j]
addi $t3,$t4,-4 #t3+a0=table[j-1]
add $t7,$t4,$a2 #t7=table[j]
add $t8,$t3,$a2 #t8=table[j-1]
lw $t5,0($t7)
lw $t6,0($t8)
bgt $t5,$t6,loop2
#switch t5,t6
sw $t5,0($t8)
sw $t6,0($t7)
j loop2
endloop1:
jr $ra