1
我們在Centos 7.2上運行清漆4。我似乎無法通過網絡連接到管理界面，即使一切似乎都已正確配置。連接到清漆4管理界面通過網絡
這裏是配置/etc/varnish/varnish.params
# Admin interface listen address and port
VARNISH_ADMIN_LISTEN_ADDRESS=0.0.0.0
VARNISH_ADMIN_LISTEN_PORT=6082
裏面我能夠但是能夠通過連接本地主機。
[[email protected] ~]# telnet localhost 6082
Trying ::1...
telnet: connect to address ::1: Connection refused
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
107 59
Authentication required.
從同一網絡上的服務器，同一命令超時。
[[email protected] ~]# telnet 192.168.0.10 6082
Trying 192.168.0.10...
的Netstat確認已逝正在偵聽端口6082上的所有接口
[[email protected] ~]# netstat -antp
Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name
tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN 3337/varnishd
tcp 0 0 0.0.0.0:6082 0.0.0.0:* LISTEN 3335/varnishd
Linux防火牆被禁用：
[[email protected] ~]# systemctl status firewalld
● firewalld.service - firewalld - dynamic firewall daemon
Loaded: loaded (/usr/lib/systemd/system/firewalld.service; disabled; vendor preset: enabled)
Active: inactive (dead)
Sep 30 09:13:23 varnish1.local systemd[1]: Stopped firewalld - dynamic firewall daemon.
這裏是正在運行的進程的詳細信息。
[[email protected] ~]# ps aux | grep varnish
root 3731 23.0 4.6 132404 88236 ? SLs 09:36 0:00 /usr/sbin/varnishd -P /var/run/varnish.pid -f /etc/varnish/default.vcl -a :80 -T 0.0.0.0:6082 -t 120 -u varnish -g varnish -S /etc/varnish/secret -s file,/var/lib/varnish/varnish_storage.bin,256M
varnish 3733 4.0 4.9 562028 93668 ? Sl 09:36 0:00 /usr/sbin/varnishd -P /var/run/varnish.pid -f /etc/varnish/default.vcl -a :80 -T 0.0.0.0:6082 -t 120 -u varnish -g varnish -S /etc/varnish/secret -s file,/var/lib/varnish/varnish_storage.bin,256M
的SELinux被禁用
[[email protected] ~]# sestatus
SELinux status: disabled
NMAP結果
[[email protected] ~]# nmap -sS -sV 192.168.0.10 --reason -p80,6082
Starting Nmap 6.40 (http://nmap.org) at 2016-09-30 11:28 EDT
Nmap scan report for 192.168.0.10
Host is up, received reset (0.0017s latency).
PORT STATE SERVICE REASON VERSION
80/tcp open tcpwrapped syn-ack
6082/tcp filtered unknown no-response
Service detection performed. Please report any incorrect results at http://nmap.org/submit/ .
Nmap done: 1 IP address (1 host up) scanned in 8.42 seconds
光油版本
[[email protected] ~]# varnishd -V
varnishd (varnish-4.0.3 revision b8c4a34)
Copyright (c) 2006 Verdens Gang AS
Copyright (c) 2006-2014 Varnish Software AS
我從幾個不同的計算機嘗試與所有有同樣的結果努力C ONNECT。這些主機之間沒有防火牆。
我不認爲該vcl文件與連接到管理終端有任何關係，但這裏是/etc/varnish/default.vcl以防萬一。
vcl 4.0;
# Based on: https://github.com/mattiasgeniar/varnish-4.0-configuration-templates/blob/master/default.vcl
import std;
import directors;
backend app1 {
.host = "192.168.0.11";
.port = "80";
.max_connections = 300; # That's it
.probe = {
#.url = "/"; # short easy way (GET /)
# We prefer to only do a HEAD/
.request =
"HEAD/HTTP/1.1"
"Host: 192.168.0.11"
"Connection: close"
"User-Agent: Varnish Health Probe";
.interval = 5s; # check the health of each backend every 5 seconds
.timeout = 2s; # timing out after 1 second.
.window = 5; # If 3 out of the last 5 polls succeeded the backend is considered healthy, otherwise it will be marked as sick
.threshold = 3;
}
.first_byte_timeout = 300s; # How long to wait before we receive a first byte from our backend?
.connect_timeout = 5s; # How long to wait for a backend connection?
.between_bytes_timeout = 2s; # How long to wait between bytes received from our backend?
}
backend app2 {
.host = "192.168.0.12";
.port = "80";
.max_connections = 300; # That's it
.probe = {
#.url = "/"; # short easy way (GET /)
# We prefer to only do a HEAD/
.request =
"HEAD/HTTP/1.1"
"Host: 192.168.0.12"
"Connection: close"
"User-Agent: Varnish Health Probe";
.interval = 5s; # check the health of each backend every 5 seconds
.timeout = 2s; # timing out after 1 second.
.window = 5; # If 3 out of the last 5 polls succeeded the backend is considered healthy, otherwise it will be marked as sick
.threshold = 3;
}
.first_byte_timeout = 300s; # How long to wait before we receive a first byte from our backend?
.connect_timeout = 5s; # How long to wait for a backend connection?
.between_bytes_timeout = 2s; # How long to wait between bytes received from our backend?
}
acl purge {
# ACL we'll use later to allow purges
"localhost";
"127.0.0.1";
"::1";
"192.168.0.0/24";
}
/*
acl editors {
# ACL to honor the "Cache-Control: no-cache" header to force a refresh but only from selected IPs
"localhost";
"127.0.0.1";
"::1";
}
*/
sub vcl_init {
# Called when VCL is loaded, before any requests pass through it.
# Typically used to initialize VMODs.
new vdir = directors.round_robin();
vdir.add_backend(app1);
vdir.add_backend(app2);
# vdir.add_backend(server...);
# vdir.add_backend(servern);
}
sub vcl_recv {
# Called at the beginning of a request, after the complete request has been received and parsed.
# Its purpose is to decide whether or not to serve the request, how to do it, and, if applicable,
# which backend to use.
# also used to modify the request
set req.backend_hint = vdir.backend(); # send all traffic to the vdir director
# Normalize the header, remove the port (in case you're testing this on various TCP ports)
set req.http.Host = regsub(req.http.Host, ":[0-9]+", "");
# Normalize the query arguments
set req.url = std.querysort(req.url);
# Allow purging
if (req.method == "PURGE") {
if (!client.ip ~ purge) { # purge is the ACL defined at the begining
# Not from an allowed IP? Then die with an error.
return (synth(405, "This IP is not allowed to send PURGE requests."));
}
# If you got this stage (and didn't error out above), purge the cached result
return (purge);
}
# Only deal with "normal" types
if (req.method != "GET" &&
req.method != "HEAD" &&
req.method != "PUT" &&
req.method != "POST" &&
req.method != "TRACE" &&
req.method != "OPTIONS" &&
req.method != "PATCH" &&
req.method != "DELETE") {
/* Non-RFC2616 or CONNECT which is weird. */
return (pipe);
}
# Implementing websocket support (https://www.varnish-cache.org/docs/4.0/users-guide/vcl-example-websockets.html)
if (req.http.Upgrade ~ "(?i)websocket") {
return (pipe);
}
#Do not cache login pages or admin pages for security purposes
if (req.url ~ "^/login\.php" ||
req.url ~ "^/search\.php" ||
req.url ~ "^/admin(.*)" ||
req.url ~ "^/admin(.*)" ||
req.url ~ "^/search(.*)" ||
req.url ~ "^/visitor(.*)" ||
req.url ~ "^/staff(.*)" ||
req.url ~ "^/staff\.php") {
return(pass);
}
# Only cache GET or HEAD requests. This makes sure the POST requests are always passed.
if (req.method != "GET" && req.method != "HEAD") {
return (pass);
}
# Some generic URL manipulation, useful for all templates that follow
# First remove the Google Analytics added parameters, useless for our backend
if (req.url ~ "(\?|&)(utm_source|utm_medium|utm_campaign|utm_content|gclid|cx|ie|cof|siteurl)=") {
set req.url = regsuball(req.url, "&(utm_source|utm_medium|utm_campaign|utm_content|gclid|cx|ie|cof|siteurl)=([A-z0-9_\-\.%25]+)", "");
set req.url = regsuball(req.url, "\?(utm_source|utm_medium|utm_campaign|utm_content|gclid|cx|ie|cof|siteurl)=([A-z0-9_\-\.%25]+)", "?");
set req.url = regsub(req.url, "\?&", "?");
set req.url = regsub(req.url, "\?$", "");
}
# Strip hash, server doesn't need it.
if (req.url ~ "\#") {
set req.url = regsub(req.url, "\#.*$", "");
}
# Strip a trailing ? if it exists
if (req.url ~ "\?$") {
set req.url = regsub(req.url, "\?$", "");
}
# Some generic cookie manipulation, useful for all templates that follow
# Remove the "has_js" cookie
set req.http.Cookie = regsuball(req.http.Cookie, "has_js=[^;]+(;)?", "");
# Remove any Google Analytics based cookies
set req.http.Cookie = regsuball(req.http.Cookie, "__utm.=[^;]+(;)?", "");
set req.http.Cookie = regsuball(req.http.Cookie, "_ga=[^;]+(;)?", "");
set req.http.Cookie = regsuball(req.http.Cookie, "_gat=[^;]+(;)?", "");
set req.http.Cookie = regsuball(req.http.Cookie, "utmctr=[^;]+(;)?", "");
set req.http.Cookie = regsuball(req.http.Cookie, "utmcmd.=[^;]+(;)?", "");
set req.http.Cookie = regsuball(req.http.Cookie, "utmccn.=[^;]+(;)?", "");
# Remove DoubleClick offensive cookies
set req.http.Cookie = regsuball(req.http.Cookie, "__gads=[^;]+(;)?", "");
# Remove the Quant Capital cookies (added by some plugin, all __qca)
set req.http.Cookie = regsuball(req.http.Cookie, "__qc.=[^;]+(;)?", "");
# Remove the AddThis cookies
set req.http.Cookie = regsuball(req.http.Cookie, "__atuv.=[^;]+(;)?", "");
# Remove a ";" prefix in the cookie if present
set req.http.Cookie = regsuball(req.http.Cookie, "^;\s*", "");
# Are there cookies left with only spaces or that are empty?
if (req.http.cookie ~ "^\s*$") {
unset req.http.cookie;
}
if (req.http.Cache-Control ~ "(?i)no-cache") {
#if (req.http.Cache-Control ~ "(?i)no-cache" && client.ip ~ editors) { # create the acl editors if you want to restrict the Ctrl-F5
# http://varnish.projects.linpro.no/wiki/VCLExampleEnableForceRefresh
# Ignore requests via proxy caches and badly behaved crawlers
# like msnbot that send no-cache with every request.
if (! (req.http.Via || req.http.User-Agent ~ "(?i)bot" || req.http.X-Purge)) {
#set req.hash_always_miss = true; # Doesn't seems to refresh the object in the cache
return(purge); # Couple this with restart in vcl_purge and X-Purge header to avoid loops
}
}
# Large static files are delivered directly to the end-user without
# waiting for Varnish to fully read the file first.
# Varnish 4 fully supports Streaming, so set do_stream in vcl_backend_response()
if (req.url ~ "^[^?]*\.(7z|avi|bz2|flac|flv|gz|mka|mkv|mov|mp3|mp4|mpeg|mpg|ogg|ogm|opus|rar|tar|tgz|tbz|txz|wav|webm|xz|zip)(\?.*)?$") {
unset req.http.Cookie;
return (hash);
}
# Remove all cookies for static files
# A valid discussion could be held on this line: do you really need to cache static files that don't cause load? Only if you have memory left.
# Sure, there's disk I/O, but chances are your OS will already have these files in their buffers (thus memory).
# Before you blindly enable this, have a read here: https://ma.ttias.be/stop-caching-static-files/
if (req.url ~ "^[^?]*\.(7z|avi|bmp|bz2|css|csv|doc|docx|eot|flac|flv|gif|gz|ico|jpeg|jpg|js|less|mka|mkv|mov|mp3|mp4|mpeg|mpg|odt|otf|ogg|ogm|opus|pdf|png|ppt|pptx|rar|rtf|svg|svgz|swf|tar|tbz|tgz|ttf|txt|txz|wav|webm|webp|woff|woff2|xls|xlsx|xml|xz|zip)(\?.*)?$") {
unset req.http.Cookie;
return (hash);
}
# Send Surrogate-Capability headers to announce ESI support to backend
set req.http.Surrogate-Capability = "key=ESI/1.0";
if (req.http.Authorization) {
# Not cacheable by default
return (pass);
}
return (hash);
}
sub vcl_pipe {
# Called upon entering pipe mode.
# In this mode, the request is passed on to the backend, and any further data from both the client
# and backend is passed on unaltered until either end closes the connection. Basically, Varnish will
# degrade into a simple TCP proxy, shuffling bytes back and forth. For a connection in pipe mode,
# no other VCL subroutine will ever get called after vcl_pipe.
# Note that only the first request to the backend will have
# X-Forwarded-For set. If you use X-Forwarded-For and want to
# have it set for all requests, make sure to have:
# set bereq.http.connection = "close";
# here. It is not set by default as it might break some broken web
# applications, like IIS with NTLM authentication.
# set bereq.http.Connection = "Close";
# Implementing websocket support (https://www.varnish-cache.org/docs/4.0/users-guide/vcl-example-websockets.html)
if (req.http.upgrade) {
set bereq.http.upgrade = req.http.upgrade;
}
return (pipe);
}
sub vcl_pass {
# Called upon entering pass mode. In this mode, the request is passed on to the backend, and the
# backend's response is passed on to the client, but is not entered into the cache. Subsequent
# requests submitted over the same client connection are handled normally.
# return (pass);
}
# The data on which the hashing will take place
sub vcl_hash {
# Called after vcl_recv to create a hash value for the request. This is used as a key
# to look up the object in Varnish.
hash_data(req.url);
if (req.http.host) {
hash_data(req.http.host);
} else {
hash_data(server.ip);
}
# hash cookies for requests that have them
if (req.http.Cookie) {
hash_data(req.http.Cookie);
}
}
sub vcl_hit {
# Called when a cache lookup is successful.
if (obj.ttl >= 0s) {
# A pure unadultered hit, deliver it
return (deliver);
}
# https://www.varnish-cache.org/docs/trunk/users-guide/vcl-grace.html
# When several clients are requesting the same page Varnish will send one request to the backend and place the others on hold while fetching one copy from the backend. In some products this is called request coalescing and Varnish does this automatically.
# If you are serving thousands of hits per second the queue of waiting requests can get huge. There are two potential problems - one is a thundering herd problem - suddenly releasing a thousand threads to serve content might send the load sky high. Secondly - nobody likes to wait. To deal with this we can instruct Varnish to keep the objects in cache beyond their TTL and to serve the waiting requests somewhat stale content.
# if (!std.healthy(req.backend_hint) && (obj.ttl + obj.grace > 0s)) {
# return (deliver);
# } else {
# return (fetch);
# }
# We have no fresh fish. Lets look at the stale ones.
if (std.healthy(req.backend_hint)) {
# Backend is healthy. Limit age to 10s.
if (obj.ttl + 10s > 0s) {
#set req.http.grace = "normal(limited)";
return (deliver);
} else {
# No candidate for grace. Fetch a fresh object.
return(fetch);
}
} else {
# backend is sick - use full grace
if (obj.ttl + obj.grace > 0s) {
#set req.http.grace = "full";
return (deliver);
} else {
# no graced object.
return (fetch);
}
}
# fetch & deliver once we get the result
return (fetch); # Dead code, keep as a safeguard
}
sub vcl_miss {
# Called after a cache lookup if the requested document was not found in the cache. Its purpose
# is to decide whether or not to attempt to retrieve the document from the backend, and which
# backend to use.
return (fetch);
}
# Handle the HTTP request coming from our backend
sub vcl_backend_response {
# Called after the response headers has been successfully retrieved from the backend.
# Pause ESI request and remove Surrogate-Control header
if (beresp.http.Surrogate-Control ~ "ESI/1.0") {
unset beresp.http.Surrogate-Control;
set beresp.do_esi = true;
}
# Enable cache for all static files
# The same argument as the static caches from above: monitor your cache size, if you get data nuked out of it, consider giving up the static file cache.
# Before you blindly enable this, have a read here: https://ma.ttias.be/stop-caching-static-files/
if (bereq.url ~ "^[^?]*\.(7z|avi|bmp|bz2|css|csv|doc|docx|eot|flac|flv|gif|gz|ico|jpeg|jpg|js|less|mka|mkv|mov|mp3|mp4|mpeg|mpg|odt|otf|ogg|ogm|opus|pdf|png|ppt|pptx|rar|rtf|svg|svgz|swf|tar|tbz|tgz|ttf|txt|txz|wav|webm|webp|woff|woff2|xls|xlsx|xml|xz|zip)(\?.*)?$") {
unset beresp.http.set-cookie;
}
# Large static files are delivered directly to the end-user without
# waiting for Varnish to fully read the file first.
# Varnish 4 fully supports Streaming, so use streaming here to avoid locking.
if (bereq.url ~ "^[^?]*\.(7z|avi|bz2|flac|flv|gz|mka|mkv|mov|mp3|mp4|mpeg|mpg|ogg|ogm|opus|rar|tar|tgz|tbz|txz|wav|webm|xz|zip)(\?.*)?$") {
unset beresp.http.set-cookie;
set beresp.do_stream = true; # Check memory usage it'll grow in fetch_chunksize blocks (128k by default) if the backend doesn't send a Content-Length header, so only enable it for big objects
set beresp.do_gzip = false; # Don't try to compress it for storage
}
# Sometimes, a 301 or 302 redirect formed via Apache's mod_rewrite can mess with the HTTP port that is being passed along.
# This often happens with simple rewrite rules in a scenario where Varnish runs on :80 and Apache on :8080 on the same box.
# A redirect can then often redirect the end-user to a URL on :8080, where it should be :80.
# This may need finetuning on your setup.
#
# To prevent accidental replace, we only filter the 301/302 redirects for now.
if (beresp.status == 301 || beresp.status == 302) {
set beresp.http.Location = regsub(beresp.http.Location, ":[0-9]+", "");
}
# Set 2min cache if unset for static files
if (beresp.ttl <= 0s || beresp.http.Set-Cookie || beresp.http.Vary == "*") {
set beresp.ttl = 120s; # Important, you shouldn't rely on this, SET YOUR HEADERS in the backend
set beresp.uncacheable = true;
return (deliver);
}
# Don't cache 50x responses
if (beresp.status == 500 || beresp.status == 502 || beresp.status == 503 || beresp.status == 504) {
return (abandon);
}
# Allow stale content, in case the backend goes down.
# make Varnish keep all objects for 6 hours beyond their TTL
set beresp.grace = 6h;
return (deliver);
}
# The routine when we deliver the HTTP request to the user
# Last chance to modify headers that are sent to the client
sub vcl_deliver {
# Called before a cached object is delivered to the client.
if (obj.hits > 0) { # Add debug header to see if it's a HIT/MISS and the number of hits, disable when not needed
set resp.http.X-Cache = "HIT";
} else {
set resp.http.X-Cache = "MISS";
}
# Please note that obj.hits behaviour changed in 4.0, now it counts per objecthead, not per object
# and obj.hits may not be reset in some cases where bans are in use. See bug 1492 for details.
# So take hits with a grain of salt
set resp.http.X-Cache-Hits = obj.hits;
# Remove some headers: PHP version
unset resp.http.X-Powered-By;
# Remove some headers: Apache version & OS
unset resp.http.Server;
unset resp.http.X-Drupal-Cache;
unset resp.http.X-Varnish;
unset resp.http.Via;
unset resp.http.Link;
unset resp.http.X-Generator;
return (deliver);
}
sub vcl_purge {
# Only handle actual PURGE HTTP methods, everything else is discarded
if (req.method != "PURGE") {
# restart request
set req.http.X-Purge = "Yes";
return(restart);
}
}
sub vcl_synth {
if (resp.status == 720) {
# We use this special error status 720 to force redirects with 301 (permanent) redirects
# To use this, call the following from anywhere in vcl_recv: return (synth(720, "http://host/new.html"));
set resp.http.Location = resp.reason;
set resp.status = 301;
return (deliver);
} elseif (resp.status == 721) {
# And we use error status 721 to force redirects with a 302 (temporary) redirect
# To use this, call the following from anywhere in vcl_recv: return (synth(720, "http://host/new.html"));
set resp.http.Location = resp.reason;
set resp.status = 302;
return (deliver);
}
return (deliver);
}
sub vcl_fini {
# Called when VCL is discarded only after all requests have exited the VCL.
# Typically used to clean up VMODs.
return (ok);
}
感謝您的任何想法！