htppd.conf

# 
# This is the main Apache HTTP server configuration file. It contains the 
# configuration directives that give the server its instructions. 
# See <URL:http://httpd.apache.org/docs/2.2> for detailed information. 
# In particular, see 
# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html> 
# for a discussion of each configuration directive. 
# 
# Do NOT simply read the instructions in here without understanding 
# what they do. They're here only as hints or reminders. If you are unsure 
# consult the online docs. You have been warned. 
# 
# Configuration and logfile names: If the filenames you specify for many 
# of the server's control files begin with "/" (or "drive:/" for Win32), the 
# server will use that explicit path. If the filenames do *not* begin 
# with "/", the value of ServerRoot is prepended -- so "logs/foo_log" 
# with ServerRoot set to "/Applications/MAMP/Library" will be interpreted by the 
# server as "/Applications/MAMP/Library/logs/foo_log". 

# 
# ServerRoot: The top of the directory tree under which the server's 
# configuration, error, and log files are kept. 
# 
# Do not add a slash at the end of the directory path. If you point 
# ServerRoot at a non-local disk, be sure to point the LockFile directive 
# at a local disk. If you wish to share the same ServerRoot for multiple 
# httpd daemons, you will need to change at least LockFile and PidFile. 
# 
ServerRoot "/Applications/MAMP/Library" 

# 
# PidFile: The file in which the server should record its process 
# identification number when it starts. 
# 
<IfModule !mpm_netware.c> 
PidFile logs/httpd.pid 
</IfModule> 

# 
# Listen: Allows you to bind Apache to specific IP addresses and/or 
# ports, instead of the default. See also the <VirtualHost> 
# directive. 
# 
# Change this to Listen on specific IP addresses as shown below to 
# prevent Apache from glomming onto all bound IP addresses. 
# 
#Listen 12.34.56.78:80 
Listen 8888 

# 
# Dynamic Shared Object (DSO) Support 
# 
# To be able to use the functionality of a module which was built as a DSO you 
# have to place corresponding `LoadModule' lines at this location so the 
# directives contained in it are actually available _before_ they are used. 
# Statically compiled modules (those listed by `httpd -l') do not need 
# to be loaded here. 
# 
# Example: 
# LoadModule foo_module modules/mod_foo.so 
# 
LoadModule authn_file_module modules/mod_authn_file.so 
LoadModule authn_dbm_module modules/mod_authn_dbm.so 
LoadModule authn_anon_module modules/mod_authn_anon.so 
LoadModule authn_dbd_module modules/mod_authn_dbd.so 
LoadModule authn_default_module modules/mod_authn_default.so 
LoadModule authz_host_module modules/mod_authz_host.so 
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so 
LoadModule authz_user_module modules/mod_authz_user.so 
LoadModule authz_dbm_module modules/mod_authz_dbm.so 
LoadModule authz_owner_module modules/mod_authz_owner.so 
LoadModule authz_default_module modules/mod_authz_default.so 
LoadModule auth_basic_module modules/mod_auth_basic.so 
LoadModule auth_digest_module modules/mod_auth_digest.so 
LoadModule file_cache_module modules/mod_file_cache.so 
LoadModule cache_module modules/mod_cache.so 
LoadModule disk_cache_module modules/mod_disk_cache.so 
LoadModule mem_cache_module modules/mod_mem_cache.so 
LoadModule dbd_module modules/mod_dbd.so 
LoadModule bucketeer_module modules/mod_bucketeer.so 
LoadModule dumpio_module modules/mod_dumpio.so 
LoadModule echo_module modules/mod_echo.so 
LoadModule case_filter_module modules/mod_case_filter.so 
LoadModule case_filter_in_module modules/mod_case_filter_in.so 
LoadModule reqtimeout_module modules/mod_reqtimeout.so 
LoadModule ext_filter_module modules/mod_ext_filter.so 
LoadModule include_module modules/mod_include.so 
LoadModule filter_module modules/mod_filter.so 
LoadModule substitute_module modules/mod_substitute.so 
LoadModule charset_lite_module modules/mod_charset_lite.so 
LoadModule deflate_module modules/mod_deflate.so 
LoadModule log_config_module modules/mod_log_config.so 
LoadModule logio_module modules/mod_logio.so 
LoadModule env_module modules/mod_env.so 
LoadModule mime_magic_module modules/mod_mime_magic.so 
LoadModule cern_meta_module modules/mod_cern_meta.so 
LoadModule expires_module modules/mod_expires.so 
LoadModule headers_module modules/mod_headers.so 
LoadModule ident_module modules/mod_ident.so 
LoadModule usertrack_module modules/mod_usertrack.so 
#LoadModule unique_id_module modules/mod_unique_id.so 
LoadModule setenvif_module modules/mod_setenvif.so 
LoadModule version_module modules/mod_version.so 
LoadModule proxy_module modules/mod_proxy.so 
LoadModule proxy_connect_module modules/mod_proxy_connect.so 
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so 
LoadModule proxy_http_module modules/mod_proxy_http.so 
LoadModule proxy_scgi_module modules/mod_proxy_scgi.so 
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so 
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so 
LoadModule ssl_module modules/mod_ssl.so 
LoadModule mime_module modules/mod_mime.so 
LoadModule dav_module modules/mod_dav.so 
LoadModule status_module modules/mod_status.so 
LoadModule autoindex_module modules/mod_autoindex.so 
LoadModule asis_module modules/mod_asis.so 
LoadModule info_module modules/mod_info.so 
LoadModule cgi_module modules/mod_cgi.so 
LoadModule fastcgi_module modules/mod_fastcgi.so 
LoadModule cgid_module modules/mod_cgid.so 
LoadModule dav_fs_module modules/mod_dav_fs.so 
LoadModule vhost_alias_module modules/mod_vhost_alias.so 
LoadModule negotiation_module modules/mod_negotiation.so 
LoadModule dir_module modules/mod_dir.so 
LoadModule imagemap_module modules/mod_imagemap.so 
LoadModule actions_module modules/mod_actions.so 
LoadModule speling_module modules/mod_speling.so 
LoadModule userdir_module modules/mod_userdir.so 
LoadModule alias_module modules/mod_alias.so 
LoadModule rewrite_module modules/mod_rewrite.so 
LoadModule perl_module modules/mod_perl.so 
LoadModule wsgi_module modules/mod_wsgi.so 
LoadModule xsendfile_module modules/mod_xsendfile.so 

LoadModule php7_module  /Applications/MAMP/bin/php/php7.1.1/modules/libphp7.so 

# 
AddType application/x-httpd-php .php .phtml 

<IfModule !mpm_netware_module> 
<IfModule !mpm_winnt_module> 
# 
# If you wish httpd to run as a different user or group, you must run 
# httpd as root initially and it will switch. 
# 
# User/Group: The name (or #number) of the user/group to run httpd as. 
# It is usually good practice to create a dedicated user and group for 
# running httpd, as with most system services. 
# 
User ssoun 
Group #-1 

</IfModule> 
</IfModule> 

<IfModule xsendfile_module> 
    XSendFile on 
</IfModule> 

# 'Main' server configuration 
# 
# The directives in this section set up the values used by the 'main' 
# server, which responds to any requests that aren't handled by a 
# <VirtualHost> definition. These values also provide defaults for 
# any <VirtualHost> containers you may define later in the file. 
# 
# All of these directives may appear inside <VirtualHost> containers, 
# in which case these default settings will be overridden for the 
# virtual host being defined. 
# 

# 
# ServerAdmin: Your address, where problems with the server should be 
# e-mailed. This address appears on some server-generated pages, such 
# as error documents. e.g. [email protected] 
# 
ServerAdmin [email protected] 

# 
# ServerName gives the name and port that the server uses to identify itself. 
# This can often be determined automatically, but we recommend you specify 
# it explicitly to prevent problems during startup. 
# 
# If your host doesn't have a registered DNS name, enter its IP address here. 
# 
ServerName localhost:8888 

# 
# DocumentRoot: The directory out of which you will serve your 
# documents. By default, all requests are taken from this directory, but 
# symbolic links and aliases may be used to point to other locations. 
# 
# MAMP DOCUMENT_ROOT !! Don't remove this line !! 
# DocumentRoot "/Users/ssoun/code/francis/public" 



# This should be changed to whatever you set DocumentRoot to. 

# <Directory "/Users/ssoun/code/francis/public"> 
#  Options All 
#  AllowOverride All 
#  Order allow,deny 
#  Allow from all 
#  XSendFilePath "/Applications/MAMP/htdocs" 
# </Directory> 



# 
# Each directory to which Apache has access can be configured with respect 
# to which services and features are allowed and/or disabled in that 
# directory (and its subdirectories). 
# 
# First, we configure the "default" to be a very restrictive set of 
# features. 
# 
<Directory /> 
    Options Indexes FollowSymLinks 
    AllowOverride None 
</Directory> 



# 
# DirectoryIndex: sets the file that Apache will serve if a directory 
# is requested. 
# 
<IfModule dir_module> 
    DirectoryIndex index.html index.php 

    <IfModule perl_module> 
     DirectoryIndex index.pl 
    </IfModule> 

    <IfModule wsgi_module> 
     DirectoryIndex index.wsgi index.py 
    </IfModule> 

</IfModule> 

# 
# AccessFileName: The name of the file to look for in each directory 
# for additional configuration directives. See also the AllowOverride 
# directive. 
# 
AccessFileName .htaccess 

# 
# The following lines prevent .htaccess and .htpasswd files from being 
# viewed by Web clients. 
# 
<FilesMatch "^\.ht"> 
    Order allow,deny 
    Deny from all 
    Satisfy All 
</FilesMatch> 

<Files ~ "^\.DS_Store"> 
    Order allow,deny 
    Deny from all 
</Files> 

# 
# ErrorLog: The location of the error log file. 
# If you do not specify an ErrorLog directive within a <VirtualHost> 
# container, error messages relating to that virtual host will be 
# logged here. If you *do* define an error logfile for a <VirtualHost> 
# container, that host's errors will be logged there and not here. 
# 
ErrorLog "/Applications/MAMP/logs/apache_error.log" 

# 
# LogLevel: Control the number of messages logged to the error_log. 
# Possible values include: debug, info, notice, warn, error, crit, 
# alert, emerg. 
# 
LogLevel error 

<IfModule log_config_module> 
    # 
    # The following directives define some format nicknames for use with 
    # a CustomLog directive (see below). 
    # 
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined 
    LogFormat "%h %l %u %t \"%r\" %>s %b" common 

    <IfModule logio_module> 
     # You need to enable mod_logio.c to use %I and %O 
     LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio 
    </IfModule> 

    # 
    # The location and format of the access logfile (Common Logfile Format). 
    # If you do not define any access logfiles within a <VirtualHost> 
    # container, they will be logged here. Contrariwise, if you *do* 
    # define per-<VirtualHost> access logfiles, transactions will be 
    # logged therein and *not* in this file. 
    # 
    #CustomLog "/Applications/MAMP/logs/apache_access.log" common 

    # 
    # If you prefer a logfile with access, agent, and referer information 
    # (Combined Logfile Format) you can use the following directive. 
    # 
    #CustomLog "/Applications/MAMP/logs/apache_access.log" combined 
</IfModule> 

<IfModule alias_module> 
    # 
    # Redirect: Allows you to tell clients about documents that used to 
    # exist in your server's namespace, but do not anymore. The client 
    # will make a new request for the document at its new location. 
    # Example: 
    # Redirect permanent /foo http://www.example.com/bar 

    # 
    # Alias: Maps web paths into filesystem paths and is used to 
    # access content that does not live under the DocumentRoot. 
    # Example: 
    # Alias /webpath /full/filesystem/path 
    # 
    # If you include a trailing/on /webpath then the server will 
    # require it to be present in the URL. You will also likely 
    # need to provide a <Directory> section to allow access to 
    # the filesystem path. 
    # 
    # We include the /icons/ alias for FancyIndexed directory listings. If you 
    # do not use FancyIndexing, you may comment this out. 
    # 

    Alias /favicon.ico "/Applications/MAMP/bin/favicon.ico" 

    Alias /icons/ "/Applications/MAMP/Library/icons/" 

    <Directory "/Applications/MAMP/Library/icons"> 
     Options Indexes MultiViews 
     AllowOverride None 
     Order allow,deny 
     Allow from all 
    </Directory> 

    Alias /phpMyAdmin "/Applications/MAMP/bin/phpMyAdmin" 
    Alias /phpmyadmin "/Applications/MAMP/bin/phpMyAdmin" 

    <Directory "/Applications/MAMP/bin/phpMyAdmin"> 
     Options Indexes MultiViews 
     AllowOverride None 
     Order allow,deny 
     Allow from all 
    </Directory> 

    Alias /phpPgAdmin "/Applications/MAMP/bin/phpPgAdmin" 
    Alias /phppgadmin "/Applications/MAMP/bin/phpPgAdmin" 

    <Directory "/Applications/MAMP/bin/phpPgAdmin"> 
     Options Indexes MultiViews 
     AllowOverride None 
     Order allow,deny 
     Allow from all 
    </Directory> 

    Alias /phpLiteAdmin "/Applications/MAMP/bin/phpLiteAdmin" 
    Alias /phpliteadmin "/Applications/MAMP/bin/phpLiteAdmin" 

    <Directory "/Applications/MAMP/bin/phpLiteAdmin"> 
     Options Indexes MultiViews 
     AllowOverride None 
     Order allow,deny 
     Allow from all 
    </Directory> 

    Alias /SQLiteManager "/Applications/MAMP/bin/SQLiteManager" 
    Alias /sqlitemanager "/Applications/MAMP/bin/SQLiteManager" 

    <Directory "/Applications/MAMP/bin/SQLiteManager"> 
     Options Indexes MultiViews 
     AllowOverride None 
     Order allow,deny 
     Allow from all 
    </Directory> 

    Alias /MAMP "/Applications/MAMP/bin/mamp" 

    <Directory "/Applications/MAMP/bin/mamp"> 
     Options Indexes MultiViews 
     AllowOverride None 
     Order allow,deny 
     Allow from all 
    </Directory> 

    Alias /adminer "/Applications/MAMP/bin/adminer" 

    <Directory "/Applications/MAMP/bin/adminer"> 
     DirectoryIndex adminer.php 
     Options Indexes MultiViews 
     AllowOverride None 
     Order allow,deny 
     Allow from all 
    </Directory> 

    # 
    # ScriptAlias: This controls which directories contain server scripts. 
    # ScriptAliases are essentially the same as Aliases, except that 
    # documents in the target directory are treated as applications and 
    # run by the server when requested rather than as documents sent to the 
    # client. The same rules about trailing "/" apply to ScriptAlias 
    # directives as to Alias. 
    # 
    ScriptAlias /cgi-bin/ "/Applications/MAMP/cgi-bin/" 

    Alias /perl/ "/Applications/MAMP/cgi-bin/" 

    <IfModule perl_module> 
     PerlModule ModPerl::Registry 
     <Location /perl> 
      SetHandler perl-script 
      PerlResponseHandler ModPerl::Registry 
      PerlOptions +ParseHeaders 
      Options +ExecCGI 
     </Location> 
    </IfModule> 
</IfModule> 

<IfModule cgid_module> 
    # 
    # ScriptSock: On threaded servers, designate the path to the UNIX 
    # socket used to communicate with the CGI daemon of mod_cgid. 
    # 
    #Scriptsock logs/cgisock 
</IfModule> 

# 
# "/Applications/MAMP/cgi-bin" should be changed to whatever your ScriptAliased 
# CGI directory exists, if you have that configured. 
# 
<Directory "/Applications/MAMP/cgi-bin"> 
    AllowOverride None 
    Options None 
    Order allow,deny 
    Allow from all 
</Directory> 

# 
# DefaultType: the default MIME type the server will use for a document 
# if it cannot otherwise determine one, such as from filename extensions. 
# If your server contains mostly text or HTML documents, "text/plain" is 
# a good value. If most of your content is binary, such as applications 
# or images, you may want to use "application/octet-stream" instead to 
# keep browsers from trying to display binary files as though they are 
# text. 
# 
DefaultType text/plain 

<IfModule mime_module> 
    # 
    # TypesConfig points to the file containing the list of mappings from 
    # filename extension to MIME-type. 
    # 
    TypesConfig /Applications/MAMP/conf/apache/mime.types 

    # 
    # AddType allows you to add to or override the MIME configuration 
    # file specified in TypesConfig for specific file types. 
    # 
    #AddType application/x-gzip .tgz 
    # 
    # AddEncoding allows you to have certain browsers uncompress 
    # information on the fly. Note: Not all browsers support this. 
    # 
    #AddEncoding x-compress .Z 
    #AddEncoding x-gzip .gz .tgz 
    # 
    # If the AddEncoding directives above are commented-out, then you 
    # probably should define those extensions to indicate media types: 
    # 
    AddType application/x-compress .Z 
    AddType application/x-gzip .gz .tgz 

    # 
    # AddHandler allows you to map certain file extensions to "handlers": 
    # actions unrelated to filetype. These can be either built into the server 
    # or added with the Action directive (see below) 
    # 
    # To use CGI scripts outside of ScriptAliased directories: 
    # (You will also need to add "ExecCGI" to the "Options" directive.) 
    # 
    AddHandler cgi-script .cgi .pl 

    # For type maps (negotiated resources): 
    #AddHandler type-map var 

    # 
    # Filters allow you to process content before it is sent to the client. 
    # 
    # To parse .shtml files for server-side includes (SSI): 
    # (You will also need to add "Includes" to the "Options" directive.) 
    # 
    #AddType text/html .shtml 
    #AddOutputFilter INCLUDES .shtml 
</IfModule> 

# 
# The mod_mime_magic module allows the server to use various hints from the 
# contents of the file itself to determine its type. The MIMEMagicFile 
# directive tells the module where the hint definitions are located. 
# 
<IfModule mime_magic_module> 
    MIMEMagicFile /Applications/MAMP/conf/apache/magic 
</IfModule> 

# 
# Customizable error responses come in three flavors: 
# 1) plain text 2) local redirects 3) external redirects 
# 
# Some examples: 
#ErrorDocument 500 "The server made a boo boo." 
#ErrorDocument 404 /missing.html 
#ErrorDocument 404 "/cgi-bin/missing_handler.pl" 
#ErrorDocument 402 http://www.example.com/subscription_info.html 
# 

# 
# EnableMMAP and EnableSendfile: On systems that support it, 
# memory-mapping or the sendfile syscall is used to deliver 
# files. This usually improves server performance, but must 
# be turned off when serving from networked-mounted 
# filesystems or if support for these functions is otherwise 
# broken on your system. 
# 
#EnableMMAP off 
#EnableSendfile off 

# Supplemental configuration 
# 
# The configuration files in the /Applications/MAMP/conf/apache/extra/ directory can be 
# included to add extra features or to modify the default configuration of 
# the server, or you may simply copy their contents here and change as 
# necessary. 

# Server-pool management (MPM specific) 
#Include /Applications/MAMP/conf/apache/extra/httpd-mpm.conf 

# Multi-language error messages 
#Include /Applications/MAMP/conf/apache/extra/httpd-multilang-errordoc.conf 

# Fancy directory listings 
#Include /Applications/MAMP/conf/apache/extra/httpd-autoindex.conf 

# Language settings 
#Include /Applications/MAMP/conf/apache/extra/httpd-languages.conf 

# User home directories 
#Include /Applications/MAMP/conf/apache/extra/httpd-userdir.conf 

# Real-time info on requests and configuration 
#Include /Applications/MAMP/conf/apache/extra/httpd-info.conf 

# Virtual hosts 
Include /Applications/MAMP/conf/apache/extra/httpd-vhosts.conf 

# Local access to the Apache HTTP Server Manual 
#Include /Applications/MAMP/conf/apache/extra/httpd-manual.conf 

# Distributed authoring and versioning (WebDAV) 
#Include /Applications/MAMP/conf/apache/extra/httpd-dav.conf 

# Various default settings 
#Include /Applications/MAMP/conf/apache/extra/httpd-default.conf 

# Secure (SSL/TLS) connections 
#Include /Applications/MAMP/conf/apache/extra/httpd-ssl.conf 
# 
# Note: The following must must be present to support 
#  starting without SSL on platforms with no /dev/random equivalent 
#  but a statically compiled-in mod_ssl. 
# 
<IfModule ssl_module> 
SSLRandomSeed startup file:/dev/urandom 1024 
SSLRandomSeed connect file:/dev/urandom 1024 

# 
# Uncomment the next line if Apache should not accept SSLv3 connections, to learn more google for "POODLE SSLv3". 
# SSLProtocol All -SSLv2 -SSLv3 
</IfModule>

虛擬主機

# 
# Virtual Hosts 
# 
# If you want to maintain multiple domains/hostnames on your 
# machine you can setup VirtualHost containers for them. Most configurations 
# use only name-based virtual hosts so the server doesn't need to worry about 
# IP addresses. This is indicated by the asterisks in the directives below. 
# 
# Please see the documentation at 
# <URL:http://httpd.apache.org/docs/2.2/vhosts/> 
# for further details before you try to setup virtual hosts. 
# 
# You may use the command line option '-S' to verify your virtual host 
# configuration. 

# 
# Use name-based virtual hosting. 
# 
NameVirtualHost *:8888 


<VirtualHost *:8888 > 
    ServerName l.di.com 
    DocumentRoot "/Users/ssoun/code/dynamic-interior/public/" 
    <Directory "/Applications/MAMP/htdocs/code/dynamic-interior/public/"> 
     Options All 
     AllowOverride All 
     Order allow,deny 
     Allow from all 
    </Directory> 
</VirtualHost> 


<VirtualHost *:8888 > 
    ServerName l.fc.com 
    DocumentRoot "/Users/ssoun/code/francis/public" 
    <Directory "/Applications/MAMP/htdocs/code/francis/public/"> 
     Options All 
     AllowOverride All 
     Order allow,deny 
     Allow from all 
    </Directory> 
</VirtualHost>

來源

2017-02-11 Tiffany Soun