0
Using this tutorial，我已經能夠覆蓋我的表編輯，以允許按editButtonItem來切換「添加行」按鈕。不過，我也希望它不允許滑動刪除，除非打開編輯 - 但滑動刪除始終處於啓用狀態。按editButtonItem不啓用/禁用刪除滑動
我已經看到了其他堆棧溢出問題，但它看起來像我已經實現了其他用戶建議需要實現的一切。我肯定錯過了什麼。
以下是我的表編輯代碼：
- (void)viewDidLoad
{
[super viewDidLoad];
tableData = ptrBookmarks;
numberOfSections = 1; // for editing: initial number of sections
// Uncomment the following line to display an Edit button in the navigation bar for this view controller.
self.navigationItem.rightBarButtonItem = self.editButtonItem;
//allow row selection during editing.
//if the "Add Row" row is selected we can trigger an insert.
//rather than forcing the using to click the (+) icon directly
self.aTableView.allowsSelectionDuringEditing = YES;
}
#pragma mark - Table view data source
- (NSInteger)numberOfSectionsInTableView:(UITableView *)tableView
{
// Return the number of sections.
return 1;
}
- (NSInteger)tableView:(UITableView *)tableView numberOfRowsInSection:(NSInteger)section
{
// Return the number of rows in the section.
if ([self isEditing]) // the current view is in editing mode, return count + an extra row
return [tableData count] + 1;
else // return count
return [tableData count];
}
- (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath
{
UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:@"cell"];
if(cell == nil){
cell = [[UITableViewCell alloc] initWithStyle:UITableViewCellStyleDefault reuseIdentifier:@"cell"];
}
//if number of rows is greater than the total number of rows in the data set
//and this view is in editing mode.
//Initialize the cell for "Add Row"
//there will be an extra row once SetEditing: is called
if(indexPath.row >= ptrBookmarks1.count && [self isEditing]){
cell.textLabel.text = @"Add Row";
}
else {
cell.textLabel.text = [tableData objectAtIndex:indexPath.row];
}
return cell;
}
//VIEW CONTROLLER METHOD: IMPORTANT
//this is a method of the view controller
//if we use apple's editing button as follows:
//self.navigationItem.rightBarButtonItem = self.editButtonItem
//then this method will be called automatically for us.
//if we are using a button callback or similar method,
//then we need to call setEditing: manually on the view
-(void) setEditing:(BOOL)editing animated:(BOOL)animated{
//wrap our code in an if statement
//only run the code if we are not swipe deleting a row.
//if we were called due to a swipeDelete action, ignore it
if(isSwipeDeleting == NO){
//call parent
[super setEditing:editing animated:animated];
//if editing mode
if(editing){
//batch the table view changes so that everything happens at once
[self.aTableView beginUpdates];
//for each section, insert a row at the end of the table
for(int i = 0; i < numberOfSections; i++){
//create an index path for the new row
NSIndexPath *path = [NSIndexPath indexPathForRow:tableData.count inSection:i];
//insert the NSIndexPath to create a new row. NOTE: this method takes an array of paths
[self.aTableView insertRowsAtIndexPaths:@[path] withRowAnimation:UITableViewRowAnimationAutomatic];
}
//animate the changes now
[self.aTableView endUpdates];
}else{
//batch the table view changes so that everything happens at once
[self.aTableView beginUpdates];
//for each section, insert a row at the end of the table
for(int i = 0; i < numberOfSections; i++){
//create an index path for the new row
NSIndexPath *path = [NSIndexPath indexPathForRow:tableData.count inSection:i];
//insert the NSIndexPath to create a new row. NOTE: this method takes an array of paths
[self.aTableView deleteRowsAtIndexPaths:@[path] withRowAnimation:UITableViewRowAnimationAutomatic];
}
//animate the changes now
[self.aTableView endUpdates];
}
}
}
//DELEGATE METHOD:
//this method will be called for every row and allows us to set the
//editing syle icon(Delete,Insert)
-(UITableViewCellEditingStyle) tableView:(UITableView *)tableView editingStyleForRowAtIndexPath:(NSIndexPath *)indexPath{
// Detemine if it's in editing mode
//if (self.aTableView.editing) {
//use the + icon(add icon) on row
//if this is the additional row created in setEditing:animated:
if(indexPath.row >= tableData.count){
return UITableViewCellEditingStyleInsert;
}
else{
//use the delete icon on this row
return UITableViewCellEditingStyleDelete;
}
//}
//else
//return UITableViewCellEditingStyleNone;
}
//handle the deletion insertion
//this method is called when the delete or insert icon has been press.
//we should update our dataSource by inserting or removing the selected INDEX
- (void)tableView:(UITableView *)tableView commitEditingStyle:(UITableViewCellEditingStyle)editingStyle forRowAtIndexPath:(NSIndexPath *)indexPath {
if (editingStyle == UITableViewCellEditingStyleDelete) {
//remove row from datasource
[tableData removeObjectAtIndex:indexPath.row];
//remove the row in the tableView because the deleteIcon was clicked
[self.aTableView deleteRowsAtIndexPaths:@[indexPath] withRowAnimation:UITableViewRowAnimationAutomatic];
}
else if (editingStyle == UITableViewCellEditingStyleInsert) {
//add a new row to the datasource
[tableData addObject:@"New Icon"];
//insert a row in the tableView because the plusIcon was clicked.
[self.aTableView insertRowsAtIndexPaths:@[indexPath]
withRowAnimation:UITableViewRowAnimationAutomatic];
}
}
//if we are in editing mode we do not want to perform Seque Transition
- (BOOL)shouldPerformSegueWithIdentifier:(NSString *)identifier sender:(id)sender {
if ([identifier isEqualToString:@"MyDetailView"] && [self isEditing]) {
return NO;
}
return YES;
}
//this method is called when the user swipes to delete a row.
- (void)tableView:(UITableView *)tableView willBeginEditingRowAtIndexPath:(NSIndexPath *)indexPath{
isSwipeDeleting = YES;//user just swipe to delete a row
}
//when the user cancel the swipe or click the delete button
//this method is call
- (void)tableView:(UITableView *)tableView didEndEditingRowAtIndexPath:(NSIndexPath *)indexPath{
isSwipeDeleting = NO;//swipe to delete ended. No longer showing the DELETE button in cell
}
// Override to support rearranging the table view.
- (void)tableView:(UITableView *)tableView moveRowAtIndexPath:(NSIndexPath *)fromIndexPath toIndexPath:(NSIndexPath *)toIndexPath {
NSString *item;
item = [[tableData objectAtIndex:fromIndexPath.row] retain];
[tableData removeObjectAtIndex:fromIndexPath.row];
[tableData insertObject:item atIndex:toIndexPath.row];
[item release];
}
// Override to support conditional rearranging of the table view.
- (BOOL)tableView:(UITableView *)tableView canMoveRowAtIndexPath:(NSIndexPath *)indexPath {
// Return NO if you do not want the item to be re-orderable.
return YES;
}
#pragma mark - Table view delegate
//DELEGATE METHOD:
//the user selected a row
//In order for the user to perform an INSERTION action on a row,
//they have to click the + icon icon. We can implement this method
//so that they can click anywhere on the add row to add a new row
//tableView.allowsSelectionDuringEditing = YES; must be set
- (void)tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath {
//deselect the selected row with animatiion
[self.aTableView deselectRowAtIndexPath:indexPath animated:YES];
//if the selected row was the "Add Row" row call tableView:commitEditingStyle:
//to add a new row
if (indexPath.row >= tableData.count && [self isEditing]) {
[self tableView:tableView commitEditingStyle:UITableViewCellEditingStyleInsert forRowAtIndexPath:indexPath];
}
else { // otherwise do regular table item selection
[self.delegate didTapBookmarksTable:[tableData objectAtIndex:indexPath.row]];
}
}