6
我正在使用Ruby on Rails構建一個Web應用程序。我使用Mailgun作爲這款應用程序的郵件。當我使用Facebook註冊時，它工作正常，但是當我嘗試使用電子郵件和密碼註冊時，我不斷收到此錯誤「554請激活您的Mailgun帳戶。檢查您的收件箱或登錄您的控制面板重新發送激活電子郵件。 「我已經授權給mailgun儀表板中的授權收件人。這裏是我的代碼：「554請激活您的Mailgun帳戶，檢查您的收件箱或登錄您的控制面板重新發送激活郵件。」錯誤Ruby on Rails
Registrations_controller.rb
class RegistrationsController < Devise::RegistrationsController
protected
def update_resource(resource,params)
resource.update_without_password(params)
end
end
配置/環境/ development.rb
Rails.application.configure do
# Settings specified here will take precedence over those in config/application.rb.
# In the development environment your application's code is reloaded on
# every request. This slows down response time but is perfect for development
# since you don't have to restart the web server when you make code changes.
config.cache_classes = false
# Do not eager load code on boot.
config.eager_load = false
# Show full error reports.
config.consider_all_requests_local = true
# Enable/disable caching. By default caching is disabled.
if Rails.root.join('tmp/caching-dev.txt').exist?
config.action_controller.perform_caching = true
config.cache_store = :memory_store
config.public_file_server.headers = {
'Cache-Control' => 'public, max-age=172800'
}
else
config.action_controller.perform_caching = false
config.cache_store = :null_store
end
# Don't care if the mailer can't send.
config.action_mailer.raise_delivery_errors = true
config.action_mailer.perform_caching = false
# Print deprecation notices to the Rails logger.
config.active_support.deprecation = :log
# Raise an error on page load if there are pending migrations.
config.active_record.migration_error = :page_load
# Debug mode disables concatenation and preprocessing of assets.
# This option may cause significant delays in view rendering with a large
# number of complex assets.
config.assets.debug = true
# Suppress logger output for asset requests.
config.assets.quiet = true
# Raises error for missing translations
# config.action_view.raise_on_missing_translations = true
# Use an evented file watcher to asynchronously detect changes in source code,
# routes, locales, etc. This feature depends on the listen gem.
config.file_watcher = ActiveSupport::EventedFileUpdateChecker
config.action_mailer.default_url_options = { host: 'localhost', port: 3000 }
config.action_mailer.delivery_method = :smtp
config.action_mailer.smtp_settings = {
address: 'smtp.mailgun.org',
port: 587,
domain: 'sandboxc77c3a9be90a494081dad1628d554337.mailgun.org',
authentication: 'plain',
user_name: '[email protected]',
password: 'password'
}
end
initalizers/devise.rb
# Use this hook to configure devise mailer, warden hooks and so forth.
# Many of these configuration options can be set straight in your model.
Devise.setup do |config|
# The secret key used by Devise. Devise uses this key to generate
# random tokens. Changing this key will render invalid all existing
# confirmation, reset password and unlock tokens in the database.
# Devise will use the `secret_key_base` as its `secret_key`
# by default. You can change it below and use your own secret key.
# config.secret_key = 'c6a5a4855ac1429f82d4a04dd9d2dda9d0bbae1a6252c3f7b7c954515169f2b693d53064f1b3656ad43ee8bcb8063d39fdc791d3885a2b6286a8280b2c4349b1'
# ==> Mailer Configuration
# Configure the e-mail address which will be shown in Devise::Mailer,
# note that it will be overwritten if you use your own mailer class
# with default "from" parameter.
config.mailer_sender = '[email protected]'
# Configure the class responsible to send e-mails.
# config.mailer = 'Devise::Mailer'
# Configure the parent class responsible to send e-mails.
# config.parent_mailer = 'ActionMailer::Base'
# ==> ORM configuration
# Load and configure the ORM. Supports :active_record (default) and
# :mongoid (bson_ext recommended) by default. Other ORMs may be
# available as additional gems.
require 'devise/orm/active_record'
# ==> Configuration for any authentication mechanism
# Configure which keys are used when authenticating a user. The default is
# just :email. You can configure it to use [:username, :subdomain], so for
# authenticating a user, both parameters are required. Remember that those
# parameters are used only when authenticating and not when retrieving from
# session. If you need permissions, you should implement that in a before filter.
# You can also supply a hash where the value is a boolean determining whether
# or not authentication should be aborted when the value is not present.
# config.authentication_keys = [:email]
# Configure parameters from the request object used for authentication. Each entry
# given should be a request method and it will automatically be passed to the
# find_for_authentication method and considered in your model lookup. For instance,
# if you set :request_keys to [:subdomain], :subdomain will be used on authentication.
# The same considerations mentioned for authentication_keys also apply to request_keys.
# config.request_keys = []
# Configure which authentication keys should be case-insensitive.
# These keys will be downcased upon creating or modifying a user and when used
# to authenticate or find a user. Default is :email.
config.case_insensitive_keys = [:email]
# Configure which authentication keys should have whitespace stripped.
# These keys will have whitespace before and after removed upon creating or
# modifying a user and when used to authenticate or find a user. Default is :email.
config.strip_whitespace_keys = [:email]
# Tell if authentication through request.params is enabled. True by default.
# It can be set to an array that will enable params authentication only for the
# given strategies, for example, `config.params_authenticatable = [:database]` will
# enable it only for database (email + password) authentication.
# config.params_authenticatable = true
# Tell if authentication through HTTP Auth is enabled. False by default.
# It can be set to an array that will enable http authentication only for the
# given strategies, for example, `config.http_authenticatable = [:database]` will
# enable it only for database authentication. The supported strategies are:
# :database = Support basic authentication with authentication key + password
# config.http_authenticatable = false
# If 401 status code should be returned for AJAX requests. True by default.
# config.http_authenticatable_on_xhr = true
# The realm used in Http Basic Authentication. 'Application' by default.
# config.http_authentication_realm = 'Application'
# It will change confirmation, password recovery and other workflows
# to behave the same regardless if the e-mail provided was right or wrong.
# Does not affect registerable.
# config.paranoid = true
# By default Devise will store the user in session. You can skip storage for
# particular strategies by setting this option.
# Notice that if you are skipping storage for all authentication paths, you
# may want to disable generating routes to Devise's sessions controller by
# passing skip: :sessions to `devise_for` in your config/routes.rb
config.skip_session_storage = [:http_auth]
# By default, Devise cleans up the CSRF token on authentication to
# avoid CSRF token fixation attacks. This means that, when using AJAX
# requests for sign in and sign up, you need to get a new CSRF token
# from the server. You can disable this option at your own risk.
# config.clean_up_csrf_token_on_authentication = true
# When false, Devise will not attempt to reload routes on eager load.
# This can reduce the time taken to boot the app but if your application
# requires the Devise mappings to be loaded during boot time the application
# won't boot properly.
# config.reload_routes = true
# ==> Configuration for :database_authenticatable
# For bcrypt, this is the cost for hashing the password and defaults to 11. If
# using other algorithms, it sets how many times you want the password to be hashed.
#
# Limiting the stretches to just one in testing will increase the performance of
# your test suite dramatically. However, it is STRONGLY RECOMMENDED to not use
# a value less than 10 in other environments. Note that, for bcrypt (the default
# algorithm), the cost increases exponentially with the number of stretches (e.g.
# a value of 20 is already extremely slow: approx. 60 seconds for 1 calculation).
config.stretches = Rails.env.test? ? 1 : 11
# Set up a pepper to generate the hashed password.
# config.pepper = '6bc2b1bff3932e8c90d4bdc72a796441ec839d1cafc371f15ed0585cbd0daf6108e84140221abbf970c8f1ddd38b3a0663abade7060d80490fa57131794ad9eb'
# Send a notification to the original email when the user's email is changed.
# config.send_email_changed_notification = false
# Send a notification email when the user's password is changed.
# config.send_password_change_notification = false
# ==> Configuration for :confirmable
# A period that the user is allowed to access the website even without
# confirming their account. For instance, if set to 2.days, the user will be
# able to access the website for two days without confirming their account,
# access will be blocked just in the third day. Default is 0.days, meaning
# the user cannot access the website without confirming their account.
# config.allow_unconfirmed_access_for = 2.days
# A period that the user is allowed to confirm their account before their
# token becomes invalid. For example, if set to 3.days, the user can confirm
# their account within 3 days after the mail was sent, but on the fourth day
# their account can't be confirmed with the token any more.
# Default is nil, meaning there is no restriction on how long a user can take
# before confirming their account.
# config.confirm_within = 3.days
# If true, requires any email changes to be confirmed (exactly the same way as
# initial account confirmation) to be applied. Requires additional unconfirmed_email
# db field (see migrations). Until confirmed, new email is stored in
# unconfirmed_email column, and copied to email column on successful confirmation.
config.reconfirmable = false
# Defines which key will be used when confirming an account
# config.confirmation_keys = [:email]
# ==> Configuration for :rememberable
# The time the user will be remembered without asking for credentials again.
# config.remember_for = 2.weeks
# Invalidates all the remember me tokens when the user signs out.
config.expire_all_remember_me_on_sign_out = true
# If true, extends the user's remember period when remembered via cookie.
# config.extend_remember_period = false
# Options to be passed to the created cookie. For instance, you can set
# secure: true in order to force SSL only cookies.
# config.rememberable_options = {}
# ==> Configuration for :validatable
# Range for password length.
config.password_length = 6..128
# Email regex used to validate email formats. It simply asserts that
# one (and only one) @ exists in the given string. This is mainly
# to give user feedback and not to assert the e-mail validity.
config.email_regexp = /\A[^@\s][email protected][^@\s]+\z/
# ==> Configuration for :timeoutable
# The time you want to timeout the user session without activity. After this
# time the user will be asked for credentials again. Default is 30 minutes.
# config.timeout_in = 30.minutes
# ==> Configuration for :lockable
# Defines which strategy will be used to lock an account.
# :failed_attempts = Locks an account after a number of failed attempts to sign in.
# :none = No lock strategy. You should handle locking by yourself.
# config.lock_strategy = :failed_attempts
# Defines which key will be used when locking and unlocking an account
# config.unlock_keys = [:email]
# Defines which strategy will be used to unlock an account.
# :email = Sends an unlock link to the user email
# :time = Re-enables login after a certain amount of time (see :unlock_in below)
# :both = Enables both strategies
# :none = No unlock strategy. You should handle unlocking by yourself.
# config.unlock_strategy = :both
# Number of authentication tries before locking an account if lock_strategy
# is failed attempts.
# config.maximum_attempts = 20
# Time interval to unlock the account if :time is enabled as unlock_strategy.
# config.unlock_in = 1.hour
# Warn on the last attempt before the account is locked.
# config.last_attempt_warning = true
# ==> Configuration for :recoverable
#
# Defines which key will be used when recovering the password for an account
# config.reset_password_keys = [:email]
# Time interval you can reset your password with a reset password key.
# Don't put a too small interval or your users won't have the time to
# change their passwords.
config.reset_password_within = 6.hours
# When set to false, does not sign a user in automatically after their password is
# reset. Defaults to true, so a user is signed in automatically after a reset.
# config.sign_in_after_reset_password = true
# ==> Configuration for :encryptable
# Allow you to use another hashing or encryption algorithm besides bcrypt (default).
# You can use :sha1, :sha512 or algorithms from others authentication tools as
# :clearance_sha1, :authlogic_sha512 (then you should set stretches above to 20
# for default behavior) and :restful_authentication_sha1 (then you should set
# stretches to 10, and copy REST_AUTH_SITE_KEY to pepper).
#
# Require the `devise-encryptable` gem when using anything other than bcrypt
# config.encryptor = :sha512
# ==> Scopes configuration
# Turn scoped views on. Before rendering "sessions/new", it will first check for
# "users/sessions/new". It's turned off by default because it's slower if you
# are using only default views.
# config.scoped_views = false
# Configure the default scope given to Warden. By default it's the first
# devise role declared in your routes (usually :user).
# config.default_scope = :user
# Set this configuration to false if you want /users/sign_out to sign out
# only the current scope. By default, Devise signs out all scopes.
# config.sign_out_all_scopes = true
# ==> Navigation configuration
# Lists the formats that should be treated as navigational. Formats like
# :html, should redirect to the sign in page when the user does not have
# access, but formats like :xml or :json, should return 401.
#
# If you have any extra navigational formats, like :iphone or :mobile, you
# should add them to the navigational formats lists.
#
# The "*/*" below is required to match Internet Explorer requests.
# config.navigational_formats = ['*/*', :html]
# The default HTTP method used to sign out a resource. Default is :delete.
config.sign_out_via = :delete
# ==> OmniAuth
# Add a new OmniAuth provider. Check the wiki for more information on setting
# up on your models and hooks.
# config.omniauth :github, 'APP_ID', 'APP_SECRET', scope: 'user,public_repo'
# ==> Warden configuration
# If you want to use other strategies, that are not supported by Devise, or
# change the failure app, you can configure them inside the config.warden block.
#
# config.warden do |manager|
# manager.intercept_401 = false
# manager.default_strategies(scope: :user).unshift :some_external_strategy
# end
# ==> Mountable engine configurations
# When using Devise inside an engine, let's call it `MyEngine`, and this engine
# is mountable, there are some extra configurations to be taken into account.
# The following options are available, assuming the engine is mounted as:
#
# mount MyEngine, at: '/my_engine'
#
# The router that invoked `devise_for`, in the example above, would be:
# config.router_name = :my_engine
#
# When using OmniAuth, Devise cannot automatically set OmniAuth path,
# so you need to do it manually. For the users scope, it would be:
# config.omniauth_path_prefix = '/my_engine/users/auth'
config.omniauth :facebook , '1811726395785808' , '2fcf2b0c1a2232b2e0850f35706bebcd' , scope: 'email', info_fields:'email,name'
end
視圖/設計/註冊/ new.html.erb
<div class="row">
<div class="col-md-4 col-md-offset-4">
<h2>Sign up</h2>
<%= form_for(resource, as: resource_name, url: registration_path(resource_name)) do |f| %>
<%= render 'layouts/shared/devisemes' %>
<div class="form-group">
<%= f.text_field :fullname, autofocus: true , placeholder: "Full Name" , class: "form-control" %>
</div>
<div class="form-group">
<%= f.email_field :email, autofocus: true , placeholder: "Email" , class: "form-control" %>
</div>
<div class="form-group">
<%= f.label :password %>
<% if @minimum_password_length %>
<em>(<%= @minimum_password_length %> characters minimum)</em>
<% end %><br />
<%= f.password_field :password, autocomplete: "off" , placeholder: "Password" , class: "form-control" %>
</div>
<div class="actions">
<%= f.submit "Sign up" , class: "btn btn-normal btn-block" %>
</div>
<% end %>
<%= link_to "Sign up with Facebook", user_facebook_omniauth_authorize_path , class: "btn btn-facebook btn-block"%>
<%= render "devise/shared/links" %>
</div>
</div>
授權的接收者截圖
圖中所示爲終端
消息時，我檢查終端中的日誌我得到這個消息whi ch會正確發送電子郵件，但是，即使電子郵件語法出現在終端中，它也不會顯示在我的電子郵件收件箱中。這是數形式的終端
Rendering devise/mailer/confirmation_instructions.html.erb
Rendered devise/mailer/confirmation_instructions.html.erb (0.8ms)
Devise::Mailer#confirmation_instructions: processed outbound mail in 17.6ms
Sent mail to [email protected] (6432.1ms)
Date: Mon, 06 Nov 2017 10:56:18 +0300
From: [email protected]
Reply-To: [email protected]
To: [email protected]
Message-ID: <[email protected]>
Subject: Confirmation instructions
Mime-Version: 1.0
Content-Type: text/html;
charset=UTF-8
Content-Transfer-Encoding: 7bit
<p>Welcome [email protected]!</p>
<p>You can confirm your account email through the link below:</p>
<p><a href="http://localhost:3000/confirmation?confirmation_token=_vmddjdeidjfjkdl">Confirm my account</a></p>
Completed 500 Internal Server Error in 6454ms (ActiveRecord: 0.3ms)
Net::SMTPFatalError (554 Please activate your Mailgun account. Check your inbox or log in to your control panel to resend the activation email.
):
發現好像給我你需要登錄你的Mailgun帳戶並激活它，它的確是在你的問題的標題中：「554請激活你的Mailgun帳戶，檢查你的收件箱或登錄到你的控制面板重新發送激活郵件」error Ruby on Rails –
我做了但我仍然得到這個錯誤 – AHmed
你有沒有考慮聯繫在Mailgun的支持？ – spickermann